LM124AJ даташиты PDF

Номер в каталоге : LM124AJ


Производитель : Texas Instruments

цоколевка :

LM124AJ datasheet

Описание :


These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902 device), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For example, the LM124 device can be operated directly from the standard 5-V supply that is used in digital systems and provides the required interface electronics, without requiring additional ±15-V supplies.


2-kV ESD Protection for: LM224K, LM224KA
LM324K, LM324KA
LM2902K, LM2902KV, LM2902KAV

Wide Supply Ranges Single Supply: 3 V to 32 V (26 V for LM2902)
Dual Supplies: ±1.5 V to ±16 V
(±13 V for LM2902)

Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA Typ
Common-Mode Input Voltage Range Includes Ground,
Allowing Direct Sensing Near Ground
Low Input Bias and Offset Parameters Input Offset Voltage: 3 mV Typ
A Versions: 2 mV Typ
Input Offset Current: 2 nA Typ
Input Bias Curren: 20 nA Typ
A Versions: 15 nA Typ

Differential Input Voltage Range Equal
to Maximum-Rated Supply Voltage: 32 V
(26 V for LM2902)
Open-Loop Differential Voltage Amplification:
100 V/mV Typ
Internal Frequency Compensation
On Products Compliant to MIL-PRF-38535, All
Parameters Are Tested Unless Otherwise Noted.
On All Other Products, Production Processing
Does Not Necessarily Include Testing of All

даташит PDF Download

LM124AJ pdf

Другие с той же файл данные :